Skip to content

Antibiotic surveillance, both halves

Antibiotic surveillance software for hospitals tracking antibiotic resistance and antibiotic use

Hospitals say antibiotic surveillance and mean two different measurements. One counts how much antibiotic patients received. The other counts how often the bacteria in your lab resist those drugs. They need different data, and only one of them needs an interface project.

Read the short answer

Try the builder on the sample data, or drop in your own CSV. It is parsed in your browser and never uploaded.

Antibiogram Builder
Synthetic sample dataset
Parsed in this browser, never uploaded.

under 40 40 to 59 60 to 74 75 to 89 90 and over n<30, below the reporting threshold n/t, not tested on this panel

Short answer

Antibiotic surveillance software tracks two things over time: antibiotic use (days of therapy per 1,000 patient days, usually from eMAR or barcode administration data) and antibiotic resistance (percent susceptible by organism, unit and quarter, from final laboratory results). Use tracking needs pharmacy administration feeds. Resistance tracking only needs the susceptibility export your lab already produces, and Antimicrobe turns that file into a CLSI M39 antibiogram from $249 a month, with unit cuts, quarterly trends and MDRO watch on the $749 Stewardship plan.

Computed from your own isolates, never from a national average.

The two jobs inside antibiotic surveillance

Ask an infection preventionist, a stewardship pharmacist and a laboratory director what antibiotic surveillance means and you get three answers that overlap only in part. The pharmacist thinks of consumption: how many days of vancomycin or meropenem the hospital gave last quarter and whether that fell after a guideline change. The laboratory director thinks of the antibiogram. The infection preventionist thinks of the organisms that end up on a contact precautions list. A purchase goes wrong when the software is chosen for one of those meanings and judged on another.

The split matters because the data comes from different systems. Antibiotic use lives in the medication administration record. Resistance lives in the laboratory information system. A platform that does both has to connect to both, and that is where most of the cost and the delay sit. A hospital that is clear about which half it needs first can often start this quarter instead of next year.

  • Antibiotic use: days of therapy, NHSN AU Option submission, the standardized antimicrobial administration ratio
  • Antibiotic resistance: cumulative antibiogram, percent susceptible by unit and specimen source, resistance trends by quarter
  • Resistant organisms: MRSA, VRE, third generation cephalosporin resistant and carbapenem resistant Enterobacterales, CRPA and CRAB counts
  • Patient-level alerts: bug-drug mismatch, IV to oral, duplicate coverage, which need live feeds from both systems

What each kind of antibiotic surveillance tool covers

The table is built from each vendor's own published material. Three of the platforms do everything in it, at a price they quote only after a demo. The question for most community hospitals is which column they need now and which can wait. The use half and its NHSN reporting are compared in detail in NHSN AUR reporting software and antimicrobial use software.

Antibiotic surveillance options by the half of the job they cover.
Option Antibiotic use tracking Resistance tracking Data needed Price published
Sentri7 (Wolters Kluwer) Yes, with NHSN AU and SAAR Yes, built-in antibiogram EHR, eMAR and lab interfaces No, quoted after demo
VigiLanz (Inovalon) Yes, with NHSN reporting Yes EHR, eMAR and lab interfaces No, implementation plus annual license
TheraDoc (Premier) Yes, with NHSN reporting Yes EHR, eMAR and lab interfaces No, sold through Premier
EHR stewardship module Yes, inside the EHR Partly, depends on build Already in the EHR Part of the EHR contract
WHONET No Yes, desktop analysis Lab export, manual setup Free software, staff time
Antimicrobe No Yes, antibiogram, unit cuts, quarterly trends, MDRO watch Lab CSV export only Yes, $249 Lab or $749 Stewardship a month

Resistance surveillance from the export you already have

Every laboratory information system can export final susceptibility results: patient identifier, collection date, specimen source, unit, organism, drug and the S, I or R interpretation the lab reported. Antimicrobe reads that file, applies the CLSI M39 first isolate per patient rule, suppresses cells under 30 isolates and builds the cumulative antibiogram. The Lab plan cuts it by specimen source and period. The Stewardship plan adds cuts by unit, quarter by quarter resistance trends and MDRO watch, which counts MRSA, VRE, third generation cephalosporin resistant Enterobacterales, CRE, CRPA and CRAB from the same rows and flags a quarter that crosses the threshold you set.

Nothing is inferred beyond what the laboratory reported, so the resistance rates match the lab's own interpretations. Hospitals that run the AMR side as a formal program usually also read antimicrobial resistance surveillance software for hospitals, and laboratories that want to see the file layout first can check lab information system integration.

Antibiotic use surveillance needs a different feed

Antibiotic use is counted from administrations, not orders, and the NHSN AU Option requires electronic medication administration or barcode data submitted in the CDA format the CDC specifies. That is why use tracking almost always comes from the EHR vendor or from a surveillance platform with an eMAR interface. The CDC NHSN Antimicrobial Use and Resistance module lists the validated vendors, and a hospital without one cannot submit AU data from a spreadsheet.

Antimicrobe does not track antibiotic use and does not submit to NHSN. If a CMS reporting deadline is the trigger for the purchase, a validated AU vendor is the answer to that deadline. The resistance half, which the same program reviews every year at committee, can run in parallel and does not have to wait for the interface.

A worked example for a 140 bed community hospital

A 140 bed hospital has an EHR with a basic stewardship module that already produces days of therapy per 1,000 patient days, and it submits AU data through the EHR vendor. What it does not have is a current antibiogram. The last one was built by hand 20 months ago from 2,310 isolates, and the infection control committee asks every quarter for MRSA and CRE counts by unit, which the infection preventionist assembles from line lists in about five hours each time.

Buying a full surveillance platform would duplicate the use tracking the EHR already does in order to get the resistance half. The narrower purchase is resistance surveillance alone: export 12 months of final susceptibility results, upload the CSV, and the antibiogram, unit cuts and quarterly MDRO counts come from the same file. On the Stewardship plan that is $749 a month, or $4,488 a year with annual billing. The 20 hours a year of committee counting and the annual rebuild stop being hand work. These figures are illustrative arithmetic, not data from a customer.

How to choose antibiotic surveillance software

Start from the deadline. If it is NHSN AU submission, choose by AU validation and eMAR fit, and read the vendor comparison in Sentri7 vs TheraDoc vs VigiLanz. If it is a stale antibiogram, an MDRO question from the committee or a Joint Commission surveyor asking how resistance data reaches prescribers, choose by how fast the resistance numbers can be produced and refreshed. For a hospital under about 150 beds, the cost side of that choice is laid out in clinical surveillance software for small hospitals.

  • Which half is due first, use or resistance?
  • Which interfaces exist today and which would the EHR vendor charge to open?
  • Who will read the output every week, and how many hours do they have?
  • Is a price published, or will the comparison wait on three sales cycles?

Who buys this

The buyer is a stewardship pharmacist, infection prevention lead or laboratory director at a community hospital whose use reporting is already handled, or contracted, and whose resistance reporting is still a spreadsheet. They can start on the Lab or Stewardship plan the same day, without a procurement project, and keep any platform decision for later. Teams that mainly need organism counts for infection control should also see infection prevention software for MDRO tracking.

Related reading: antimicrobial resistance surveillance software, NHSN AUR reporting software compared, hospital antibiogram software, MDRO tests for your lab and how they are reported. The four steps from susceptibility testing data to an antibiogram cover the method end to end.

Questions

On this page's topic

What does antibiotic surveillance software do?

It tracks antibiotic use and antibiotic resistance over time. Use tracking counts days of therapy from administration data. Resistance tracking turns laboratory susceptibility results into an antibiogram, unit cuts and trends. Large platforms do both through EHR interfaces; Antimicrobe does the resistance half from a lab CSV export.

Do you need an EHR interface for antibiotic surveillance?

For antibiotic use and patient-level alerts, yes, because they need live administration and order data. For resistance surveillance, no. A CSV export of final susceptibility results is enough to build the cumulative antibiogram, unit cuts and quarterly resistance trends.

How much does antibiotic surveillance software cost?

Platforms that cover use and resistance quote after a demo, usually an implementation fee plus an annual license. Antimicrobe covers resistance only and publishes its price: $249 a month on the Lab plan, $749 a month on the Stewardship plan with unit cuts, trends and MDRO watch.

Can Antimicrobe submit NHSN antimicrobial use data?

No. It does not read administration data and does not submit to NHSN. Hospitals that need AU submission use their EHR vendor or a validated surveillance platform, and can use Antimicrobe alongside it for the antibiogram and resistance trends.

More on antimicrobial resistance reporting

Start with your own export

See your own resistance picture, cut the way you actually work

Build the antibiogram on the synthetic sample dataset, or drop in your own CSV and watch it parse without leaving your browser. When you want an account, one email address is the whole sign-up.

Your file is parsed in your browser and never uploaded. No card required.